View PHPM6B20E60D3_1295638.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MHPM6B20E60D3/D
Product Preview
Hybrid Power Module
Integrated Power Stage for 230 VAC Motor Drives
This module integrates a 3-phase inverter and 3-phase rectifier in a single convenient package. It is designed for 2.0 hp motor drive applications at frequencies up to 15 kHz. The inverter incorporates advanced EM-Series insulated gate bipolar transistors (IGBT) matched with ultrafast soft (UFS) free-wheeling diodes to give optimum performance. The input bridge uses rugged, efficient diodes with high surge capability. The top connector pins are designed for easy interfacing to the user's control board. It is pin-compatible with MHPM6B15E60D3 series modules for scalability. * Short Circuit Rated 10 s @ 125C, 400 V * Pin-to-Baseplate Isolation Exceeds 2500 Vac (rms) * Compact Package Outline * Access to Positive and Negative DC Bus * Gate-Emitter Clamp Diodes for ESD Protection * UL Recognition Pending ORDERING INFORMATION
Device PHPM6B20E60D3 Voltage Rating 600 Current Rating 20 Equivalent Horsepower 2.0
MHPM6B20E60D3
Motorola Preferred Device
20 AMP, 600 VOLT HYBRID POWER MODULES
CASE 464-03 ISSUE B
MAXIMUM DEVICE RATINGS (TJ = 25C unless otherwise noted)
Rating Repetitive Peak Input Rectifier Reverse Voltage (TJ = 25C to 150C) IGBT Reverse Voltage Gate-Emitter Voltage Continuous IGBT Collector Current (TC = 25C) Continuous IGBT Collector Current (TC = 80C) Repetitive Peak IGBT Collector Current (1) Continuous Free-Wheeling Diode Current (TC = 25C) Continuous Free-Wheeling Diode Current (TC = 80C) Repetitive Peak Free-Wheeling Diode Current (1) Average Converter Output Current (Peak-to-Average ratio of 10, TC = 95C) Continuous Input Rectifier Current (TC = 25C) Non-Repetitive Peak Input Rectifier Forward Surge Current (2) (TJ = 95C prior to start of surge) IGBT Power Dissipation per die (TC = 95C) Free-Wheeling Diode Power Dissipation per die (TC = 95C) Input Rectifier Power Dissipation per die (TC = 95C) (1) 1.0 ms = 1.0% duty cycle (2) 1.0 ms = 10% pulse width (tw 10%)
Preferred devices are Motorola recommended choices for future use and best overall value. This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.
Symbol VRRM VCES VGES ICmax IC80 IC(pk) IFmax IF80 IF(pk) IOmax IDC IFSM PD PD PD
Value 900 600 20 20 15 40 20 14 40 20 20 475 25 17 13
Unit V V V A A A A A A A A A W W W
Motorola IGBT Device (c) Motorola, Inc. 1998
Data
1
MHPM6B20E60D3
MAXIMUM DEVICE RATINGS (TJ = 25C unless otherwise noted)
Rating Junction Temperature Range Short Circuit Duration (VCE = 400 V, TJ = 125C) Isolation Voltage, pin to baseplate Operating Case Temperature Range Storage Temperature Range Mounting Torque -- Heat Sink Mounting Holes Symbol TJ tsc VISO TC Tstg -- Value - 40 to +150 10 2500 - 40 to +95 - 40 to +150 12 Unit C
ms
Vac C C lb-in
ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted)
Characteristic DC AND SMALL SIGNAL CHARACTERISTICS Input Rectifier Forward Voltage (I = 20 A) TJ = 125C Maximum Instantaneous Reverse Current (V = 900 V) TJ = 150C Gate-Emitter Leakage Current (VCE = 0 V, VGE = 20 V) Collector-Emitter Leakage Current (VCE = 600 V, VGE = 0 V) Gate-Emitter Threshold Voltage (VCE = VGE, IC = 1.0 mA) Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0 V) Collector-Emitter Saturation Voltage (IC = ICmax, VGE = 15 V) TJ = 125C Free-Wheeling Diode Forward Voltage (IF = IFmax, VGE = 0 V) TJ = 125C Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) THERMAL CHARACTERISTICS (EACH DIE) Thermal Resistance -- IGBT Thermal Resistance -- Free-Wheeling Diode Thermal Resistance -- Input Rectifier RqJC RqJC RqJC -- -- -- 1.8 2.6 3.4 2.2 3.3 4.2 C/W C/W C/W VF IR IGES ICES VGE(th) V(BR)CES VCE(SAT) VF Cies -- -- -- -- -- -- 4.0 600 -- -- -- -- -- 1.0 0.92 50 3000 -- 5.0 6.0 -- 2.2 2.5 2.0 1.8 TBD 1.25 -- -- -- 50 100 8.0 -- 2.6 -- 2.3 -- -- V Symbol Min Typ Max Unit
mA mA mA
V V V V pF
2
Motorola IGBT Device Data
MHPM6B20E60D3
U + C1 R1 NTC 1 2 3 4 5 6 7 8 V W MOTOR OUTPUT
D7
D9
D11
D1
Q1
D3
Q3
D5
Q5
D8
D10
D12 D2 Q2 D4 Q4 D6 Q6
16
15
14
13
12
11
10
9
THREE PHASE INPUT
SENSE RESISTOR
Figure 1. Schematic of Module, Showing Pin-Out and External Connections
Motorola IGBT Device Data
3
MHPM6B20E60D3
RECOMMENDED PCB LAYOUT VIEW OF BOARD FROM HEAT SINK (All Dimensions Typical) NON-PLATED THRU-HOLE 0.140 0.265 KEEP-OUT ZONES (x4) 0.270
0.175
0.250
0.625 0.270 PIN 1
PLATED THRU-HOLES (x16)
0.065 0.250 3.500
PACKAGE "SHADOW"
0.450
0.625
0.175
0.175
1.350 1.530
OPTIONAL NON-PLATED THRU-HOLES FOR ACCESS TO HEAT SINK MOUNTING SCREWS (x2)
Figure 2. Package Footprint
NOTE: 1. Package is symmetrical, except for a polarizing plastic post near pin 1, indicated by a non-plated thru-hole in the footprint. 2. Dimension of plated thru-holes indicates net size after plating. 3. Access holes for mounting screws may or may not be necessary depending on assembly plan for finished product.
4
Motorola IGBT Device Data
MHPM6B20E60D3
PACKAGE DIMENSIONS
A AA U Q 3 PL Y 2 PL
1 2 3 4 5 6 7 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. LEAD LOCATION DIMENSIONS (ie: G, S, R, H ...) ARE TO THE CENTER OF THE LEAD. MILLIMETERS MIN MAX 88.39 89.41 38.35 39.37 12.32 13.59 0.89 1.65 8.64 9.65 0.13 0.64 5.97 6.73 33.91 34.67 0.41 1.22 16.26 17.27 3.71 4.72 5.46 6.48 10.92 11.94 24.89 25.91 2.01 2.62 16.76 17.53 15.49 16.26 75.69 76.71 55.88 57.15 29.97 30.99 5.26 5.77 11.30 12.07 2.29 2.79 16.26 17.27 INCHES MIN MAX 3.480 3.520 1.510 1.550 0.485 0.535 0.035 0.065 0.340 0.380 0.005 0.025 0.235 0.265 1.335 1.365 0.016 0.048 0.640 0.680 0.146 0.186 0.215 0.255 0.430 0.470 0.980 1.020 0.079 0.103 0.660 0.690 0.610 0.640 2.980 3.020 2.200 2.250 1.180 1.220 0.207 0.227 0.445 0.475 0.090 0.110 0.640 0.680
J
BPN R
16 15 14 13 12 11 10 9
H F DETAIL Z
16 PL
S D 16 PL
G 14 PL
M 4 PL DETAIL Z
AB
CX
K E L W
V
DIM A B C D E F G H J K L M N P Q R S U V W Y X AA AB
CASE 464-03 ISSUE B
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488
Motorola IGBT Device Data
MHPM6B20E60D3/D
5

▲Up To Search▲

Price & Availability of PHPM6B20E60D3

	To Download PHPM6B20E60D3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .